Skip to main content

7 Tips to Keep Your Sink and Tube Line Clean in West Michigan


A sleek and spotless sink with matching spotless tube line can be an assurance of healthy living. Having 
a well-maintained kitchen where your food is prepared will keep you from worrying about food poisoning 
or contamination. Moreover, a clean bathroom and washroom could give you a light and comfortable 
atmosphere. Hence, sink and tube line cleaning is a must in every household or business. 

Here are seven tips to keep your sink and tube line spotless.

1. Use a scrub
The regular flow of water and soap on your sink does not keep your sink always clean. If you are not careful, 
soap deposits, water spots, food stains, and rust will build up on its surface. The frequency of scrubbing 
your sink depends on how often you use it. 

2. Use paper towels soaked in bleach
You can make your porcelain enamel sink sparkle by lining it with paper towels soaked in bleach. 
 Line the sink with paper towels and soak them with bleach. Then you can leave the towels in the sink for 
30 minutes; after which you can throw them away and wash the sink with running water. However, you 
should not use bleach on colored porcelain because its color will fade. 

3. Safeguard sinks from stains and scratches
A kitchen sink could be costly; hence, a replacement would affect your budget. Thus, when you have 
installed a new shiny sink, keep it looking brand new by putting a perforated plastic mat in the bottom of the 
sink to protect its surface from stains and scratches, and to keep your plates from breaking. Also, don’t let 
acidic foods like fruit, salad dressing, and vinegar stay longer on the skin's surface. This could result in 
stains or scratches on your sink. For more information about sink and tube line cleaning in Grand 
Haven contact us.

4. Apply baking soda
For sinks that are made of non-porous, acrylic-based solid surface, cleaning is not much of a problem 
because these are stain-resistant. You can regularly clean them with soapy water or cleaners made 
specifically for this type of sink. You can rub out stains with baking soda mixed with water and then rinse 
it thoroughly.

5. Use lemon juice 
Another way of removing stains from sinks is the use of lemon juice. Make a paste from one-half lemon 
and one-half cup of powdered borax. With the use of a sponge dabbed in the mixture, rub the stain and 
then rinse with running water. This works well with stainless steel, porcelain enamel, and other materials. 
You can contact us for more details.

6. Put vinegar on lime deposits
You might have noticed that white spots stick to your faucets and that these are hard to remove. These 
are lime deposits that come from mineral-rich hard water. Use vinegar to effectively remove these stains 
by soaking a paper towel in vinegar and wrapping them around the area. After 10 minutes, you can rub 
the spots with a dry paper towel. This can be applied to all types of sinks and tubes except colored and 
brass because vinegar could discolor them.

7. Free your drain from clogs
Always keep your drain from clogs by keeping soap, hair, food, and other particles out of the sink drain. 
Make your mixture of salt, baking soda, and cream of tartar to be poured regularly into the drain followed 
by boiling water. You have nothing to worry about clogs though; West Michigan Septic Sewer & Drain 
Service is more than willing to help you.


If you need help in cleaning or checking your Septic Sewer and Drain, call West Michigan Septic 
Sewer and Drain Service in the following areas: Muskegon at 231-739-7423; Grand Haven at  
616-847-1072; Whitehall at 231-893-4252; Holland at 616-392-8988; Coopersville at 616-837-1800
Allendale at 616-895-9080; and Twin Lake at 231-828-5595. You can also visit their website for more 
details at http://bit.ly/WMSSDContactUs. Their friendly and professional technicians will surely give 
you a very satisfying result.

Comments

Popular posts from this blog

The Signs of a Broken Sewer Pipe in Grand Haven, Michigan

Here are  the signs of a broken sewer pipe in Muskegon, Michigan. 1.     Regular blockages or sewage backups One-off blockages might be solved by a thorough  sewer system repair,  but if your home suffers from regular blockages or even in  sewage backups in your  home, then a leakage somewhere along the sewer is the likely culprit. Without having a survey done in your  sewer and drains,  it can be tough to differentiate between a blockage and damage to the pipe itself. If you’ve suffered numerous cases of  blocked drains  in your home, a CCTV survey will identify any damage that is impeding the function of your drains. After that, the problem can be sorted out once and for all. 2.     Smell of sewage This is probably one of the first symptoms that you’re likely to notice. Smelling a foul sewage smell around your drains or in your home could indicate damage somewhere along the  sewer pipe . Again, ...

What is the Function of a Septic or Sewer Lift Pump in Muskegon, Michigan?

A sewage lift pump is used to transfer sewage liquids and solids from one place to another. Usually, in residential applications, sewage includes soft solids up to 2″ in diameter is pumped from a sewage basin to a sewer system or a septic tank. A sewage lift pump in Muskegon, Whitehall, Holland, Grand Haven, Allendale, Twin Lake, and Coopersville is installed at the lowest point of the sewage basin. Since the pump is submerged most of the time, it is also referred to as a submersible sewage pump. Sewage lift pump can be automatic, manual or dual mode. A dual-mode pump contains a piggyback plug, which allows the pump to be used as either manual, wherein the pump bypasses the switch and is plugged in directly into the socket or as automatic, wherein the pump is plugged in through the floating switch and works only when the switch is activated. Due to a possibility of sewage overflow, it is generally not advised to use a manual sewage pump inside of a sewage basin. Sewage...

Hydro Jetting: To Unclog Pipes

A blockage in your sewer lines may result clogged drains and possibly cause to contaminate your water supply. Once you have experienced reoccurring clogged pipes in your home or commercial building, you must seek an expert technician to check your sewer system line. Your sewer pipe lines will accumulate small particles and debris over time. The stack of waste material will block the passage of wastewater going through the local sewer system. One of the best solutions to unclog your drains is by means of hydro jetting. Hydro jetting is a process of using high-pressured water to the interior surface of pipe walls to remove the blockage, scale, grease and other rubbish that builds up inside. It accomplishes in-depth cleaning of your pipes. But, there are things that need to consider before using this procedure in cleaning your pipes. How it works? An expert technician will meticulously inspect your pipelines and the extent of the sewer system problem. If your pipes are old, this pro...