How to Avoid Faulty Sump Pump Back-up in Michigan?

The best way to avoid sump pump back-up is with planning and maintenance. Aside
from being defective, problems arise due to lack of proper maintenance or careless
installation. 

Many factors contribute to make your sump pump work. When they are all working
properly, it is good news for the life of your sump pump. If there is a failure in your sum
pump’s parts, the backup must be prepared whether from normal usage, weather or
power failure. Winters in Michigan can cause discharge lines to freeze or debris can
clog your discharge line.

The most common cause of sump pump failure is a power failure. But there are other
reasons that can trigger sump pump back-up in Muskegon. They are a faulty switch,
improper installation or product failure. If maintained properly, many failures can be
avoided. 

There are a lot of reasons why your sump pump might be failing and determining these
problems is the solution in avoiding them. One of the most common cause of faulty
sump pump is a power outage. Sump pumps depend on your house for power and
blackouts are very problematic. 

There are two ways to deal with this problem: 

1.    It is better to have a backup generator when power outages arises. 

-another one is to purchase a sump pump battery back up that operates during power
outage and this is less costly. It can cost between $ 275 and $500 and addition to this
is the labor for installation

-there are times that your unit could be too big or small for your house, which makes
your pump to fail

-make sure that your pump has the right size and the amount of ground water it will
need for the pump to operate. 

-it might have a switch problem which is usually common because of the float switch
that usually is being used on a sump pump that is often the part that wears out. 

2.    Finally, maintenance is always the key to prevent the failure of your sump pump. 

-you can test your pump by running a water hose into the sump pit or pouring in a five
gallon bucket of water.

-when the water reaches the exact level, the pump should turn itself on

-if backup pump is available on your household, you can test it a few times each year
to know if it will work in times of a power outage. 

-create a note when the battery is due so that it can be replaced. 

-the backup pump will not work if the battery dies or expired. 

-make sure the discharge line’s airhole is clear when testing your pump. 

-the pump’s float switch shouldn’t be controlled so ensure that electrical cords are not
tangled around the switch. 

-lastly, get rid of any gravel in the sump pit and check that the screen that covers the
sump pump’s water intake is clear from debris. 

Problems with your sump pump back up, West Michigan Septic Sewer & Drain
Service, a sump pump back-up in Grand Haven, is a company with knowledgeable
and professional experts for your sump pump back-up repair and will promptly
respond to your call. Contact us through our following numbers in our service areas:
Muskegon: 231-739-7423 | Grand Haven: 616-847-1072 | Sump Pump Back-Up in
Whitehall: 231-893-4252 | Sump Pump Back-up in Holland: 616-392-8988 |
Sump Pump Back-up in Coopersville: 616-837-1800 | Sump Pump Back-up in
Allendale: 616-895-9080 | Sump Pump Back-up in Twin Lake: 231-828-5595 or
visit our website: https://www.wmssd.com/.

SUMMARY 

Sump pump failure can be prevented if it is only maintained and installed properly.
But if you are having troubles, there are ways on how you can deal with this problem.