A sump pump can
be the difference between a costly flooding incident and a dry basement. To learn more about sump pump maintenance, there are things you
can do to prevent
sump pump back up in Muskegon, Michigan.
1. If you’ve never installed a sump pump, Grand Haven. Sump pump
Whitehall sump pump Holland, sump pump Coopersville, sump pump Allendale, sump
pump Twin Lake don’t risk doing it yourself. You might end
up paying a lot more for damages than for the cost of proper installation. Hire
West Michigan Septic
Sewer & Drain Service, a plumbing professional to avoid the
risks of faulty installation.
2. During a powerful storm, your home can
lose power, putting your basement at risk for flooding. To ensure your sump pump continues
to work during a power outage, connect it to a backup power source, such as a
generator or battery backup system.
3. Test your sump
pump system twice a year – before spring and fall – to
make sure that it’s in good working condition. To test the system, pour water
in the sump pit until it activates the pump switch. If it empties slower than
normal, check the discharge pipe or the pump itself for clogs and other issues.
4. Check that the drainage pipes are
tightly connected and are directed away from your home’s foundation. Also,
inspect the pipe for damage and clogs. Seek help at once from West Michigan Septic Sewer &
Drain Service if you find clogs or damage. Anything that
impedes the flow could result in basement flooding due to slow drainage or no
drainage at all.
5. Ensure
your sump pump doesn’t
sit on debris such as silt or gravel, which could be sucked up into the pump,
ruining the motor. Instead, place it on a steady flat brick. Also, ensure the
sump basin has a filter fabric around it to stop debris from coming in.
6. A
stop control tells the sump
pump motor to stop once the water level goes below the
float. Your sump pump needs ample space around the float to both float and
sinks freely. If there isn’t enough room or if there is some type of
obstruction in the way, the float may cause the pump to work improperly, which
can burn up your motor.
7. Problem
scan happen if someone unplugs the sump
pump and forgets to plug it back in. To prevent this, never unplug the pump
or make sure you plug it back in if you do.
8. Knowing where your sump pump is found is important but if you
forget, you might end up piling stuff on top of it. That can result in damaging
the sump pump and limiting accessibility. When storing items in your basement,
always locate your sump pump first to avoid this problem.
Routine sump
pump maintenance from West Michigan Septic Sewer & Drain Service
goes a long way in guarding against basement flooding. Schedule a thorough
inspection twice a year. Power failures are the most likely cause of sump pump
failure, but other reasons, such as a faulty switch, incorrect installation or
even the unlikely event of a product failure, can trigger sump pump back-up.
With routine maintenance on your sump pump, many failures can be avoided.
If your sump
pump backs up, West
Michigan Septic Sewer & Drain Service, the knowledgeable,
professional experts for your sump
pump back-up repair, will promptly respond to your
call. Contact us today!
Comments
Post a Comment